ASSESSMENT DIRECTION: Identify the following statements. Choose your answer from the given options. Write your answer on a separate sheet of paper. 1. How would you differentiate Straight-Through Cable from Cross-Over Cable? A. Straight through cable uses 568A standard on both ends while cross-over cable uses 568B standard on both ends. B. Cross-over cable uses 56BA standard on both ends while Straight-Through cable unes 568B standard on both ends. C. Straight-Through cable uses the same cable standard on both ends but connects dissimilar devices together while Cross- Over cable uses two different cable standards on each end but connects 2 similar devices. D. Cross-Over cable uses the same cable standard on both ends but connects dissimilar devices together while Straight- Through cable uses two different cable standarde on each end but connects 2 similar devices. 2. How would you create a Straight-Through Cable? A. Arrange the UTP cablo using 568A or 568B standard. Insert the cable in the RJ45 while its hook is facing downward, Crimp the RJ45 together with the UTP cable as arrangod. Remember to use the same standard for both ends of the cable, B. Arrange the UTP cable using 668A on one end and 568B standard on the other end. Insert the cable in the RJ45 whilo its hook is facing downward. Crimp the RJ45 together with the UTP cable as arranged. C. Arrange the UTP cable anyway you like. Insert the cable on the RJ45 while its hook is facing downward. Crimp tho RJ45 together with the UTP cable as arranged. D. Both A and B options are the correct. 3. How would you create a Cross-Over Cable? A. Arrange the UTP cable using 568A or 568B cable standards. Insert the cable in the RJ45 while its hook is facing downward. Crimp tho RJ45 together with the UTP cable as arranged. Remember to use the same standard for both ends of the cable. B. Arrange the UTP cable using 568A cable standard on one end and 508B cable standard on the other end. Insert the cable in the RJ45 while its hook is facing downward. Crimp the RJ45 together with the UTP cable as arranged. C.Arrange the UTP cable anyway you licensert the cable in the RJ45 while its hook lo facing downward. Crimp the RJ45 together with the UTP cable as arranged. D.Both A and B options are the correct.
