Answer:
Place the cardboard on a hard, flat surface. The cardboard with serve as the bottom layer to prevent the carbon from making a copy onto the surface below.
Place piece of paper that will become the copy on top of the cardboard.
Place the carbon paper, shiny side down, over the paper that will be the copy.
Place the original to be copied on top of the dull side of the carbon paper.
Use a pencil or a pen to write on the original by pressing down firmly to make sure the carbon is transferred. You can write words, draw a design or even trace a picture. If you are tracing a picture, simply place the picture on top of the paper, and trace it with a pencil.
To make more than one copy using carbon paper, repeat Steps 2 and 3. Then place the original to be copied on top of the last piece of carbon paper. The more copies you make, the harder you will need to press down to ensure that the carbon transfers to the bottom layer.
If you want to use a typewriter to make copies, repeat Steps 2 through 4. Then place all three sheets into the typewriter as if they were one sheet, and begin typing.
Tip
Carbon paper can be messy. Avoid touching the shiny side of the paper, as it can get on your hands, which may cause you to smudge your copies.
